Author: admin

AMC-HAMMER OIL is supplied in 3 grades, 150, 320 and 460 centipoises with or without Molylube additive Molybdenum disulfide – to improve the lubrication and wear characteristics of the hammer.

AUS-TROL can be used with AUS-GEL, CR- 650 and LIQUI- POL to give a complete core recovery fluid that is solids free. It can also be used to make up stiff foam in air drilling operations.

• Effective – Improved core recovery in most difficult drilling conditions
• Economical – Saves on freight costs, storage and mixing time
• Versatile – Works in fresh or salty water and reduces filtrate loss to improve hole stability through sensitive clays
• Environmentally Friendly – AUS-TROL® is non toxic and does not ferment. The product is colourless, odourless and tasteless in water.

AMC-HAMMER OIL is supplied in 3 grades, 150, 320 and 460 centipoises with or without Molylube additive Molybdenum disulfide – to improve the lubrication and wear characteristics of the hammer.

Holes Size – Consumption (based on max. 35Opsi air) 3½“ to 5` – 1.5 to 2.0 litres/hour 5” to 7½“ -2.0 to 2.5 litres/hour 7 ½ “ to 8 ½ “ – 2.5 to 3.0 litres/hour 8 ½ “ to 8 ¾ “ – 3.0 to 3.5 litres/hour 8 ¾ “ to 17 ½ “ – 4.5 to 5.0 litres/hour

• With the addition of Molylube concentrate, friction and wear to the piston and cylinder is greatly reduced.
• Prevents metal to metal contact and surface scuffing – lubricates when oil films are unable to survive.
• The AMC-HAMMER OIL with Molylube additive is highly effective in salty water conditions when drilling with foam.
• The Oil/Molylube concentrate will not wash off the piston when foam is pumped through the hammer.
• AMC-HAMMER OIL with Molylube additive is premixed at AMC’s factory and has been formulated to remain in suspension.

AUS-PLUG is a hydrophilic polymer in granular form that absorbs up to 500 times its original volume in water. AUS-PLUG is ideal for sealing zones of lost circulation and can also be used to reduce rod vibration in holes where lost returns are a problem.

AUS-PLUG should be partially pre-hydrated in fresh water or the drilling fluid before being pumped down into the cavity or when spotted across the thief zone. The mixture will swell rapidly to help seal and plug fissures, cracks and porous formations.

• Easy to use
• Very economical
• Extremely high expansion rate
• Efficient in low pressure environments
• Environmentally safe
• Easy to drill out
• Compatible with most products and systems.

CR-650 is a high molecular weight, powdered polymer which has been developed to improve core recovery, particularly in broken and sandy formations. It may also be used to stabilize reactive clays and shales and to provide lubrication when diamond drilling in bad conditions.

Add to Fresh Water Under normal drilling conditions – 0.5 to 0.75 kg/1,000 litres.

To stabilize swelling clays and shales – 0.75 to 1.0 kg/1,000 litres.

To improve core recovery in sandy, friable formations and to increase hole stability – 1 to 2 kgs/1,000 litres.

CR-650 should be mixed by adding slowly through a jet tunnel or high speed stirrer.

• Effective – mixes rapidly in fresh to brackish water with minimum shear.
• Economical – 92% active. Provides excellent viscosity at a minimum concentration.
• Environmentally friendly – non-hazardous, non-toxic and will not ferment. Compatible – will not wash off ROD-GREASE.