| 3-section models | 40-ft. (12.19-m) |
| 5-section models | 56-ft. (17.06-m)76-ft. (23.16-m |
| Required tractor | 320НP and more |
Categories
JOHN DEERE 1870/P500
Month: April 2023
Categories
JOHN DEERE 1830/H500
| 3-section models | 41-ft. (12.49-m) |
| 5-section models | 50-ft. (15.24-m)61-ft. (18.59-m) |
| Required tractor | 320НP and more |
Categories
Powerful service
| Cylinders / displacement | 6/6068 PTE |
| Rated power (kW / hp) | 103/140 |
| Fuel tank capacity (l) | 225 l |
| Fuel system | High pressure common rail |
| PTO shaft speed (r/min) | 540/1000rpm |
| Height/Length/With (mm) | 4900×2480×2760 |
| Gearbox | Dry clutch 12F+4R synchronizer shifting (optional 24F+8R/24F+12R, wet clutch, power switching between high and low gears, front and rear power switching) |
Corrosion inhibitor:
An extensive range of corrosion inhibitors suitable for all water treatment applications is avaliable from WTS. Suitable for all applications from basic pipeline protection through to applications that have enviornmentally sensitive discharges
Biocides and Slime Pentrants:
A range of WTS biocides and pentrants are available. They can be slugged dosed or tailored for continuous use. WTS also has the expertise to install generators that produce Chlorine Dioxide and Mono-Chloroamines (MCA) on site for reduced application costs.
Open and Closed System Treatments:
Our closed system treatments incorporate a variety of elements that protect your assets, regardless of the material of construction
Categories
HYDROMETALLURGY
LIX:
At the core of BASF’s hydrometallurgical offering is an extensive range of LIX® oxime extractants that are widely used in the purification of copper and nickel leach solutions. Oxime formulations can be tailored to meet individual customer requirements and are suitable for a wide range of leach solutions. Solvent extraction of valuable anionic species like uranium and vanadium is accomplished with the BASF range of Alamine® and Aliquat® tertiary and quaternary amines.
Lupromin:
Clays are used to remove surface-active compounds from in-process copper and nickel solvent extraction organic streams.
Guarfloc:
Smoothing aids are guar-based reagents for use in copper electrowinning.
Categories
ANTI-SCALENT
Antiprex D :
Polymeric dispersants, rheology modifiers and scale inhibitors for use in a wide variety of mineral processing systems
Categories
SOLID LIQUID SEPARATION
Magnafloc :
A range of synthetic flocculants and coagulants designed for a wide variety of mineral processing applications: e. g. thickening, clarification, filtration and centrifugation.
Rheomax :
Combines a range of advanced flocculants (Rheomax® DR) and an innovative approach to Tailings Management (Rheomax® ETD) to provide novel solutions to the mining industry’s pain points. In particular, challenges that relate to the use and recovery of water, process optimization, improved recovery of metals or minerals, minimization of land footprint and faster rehabilitation of that land
Categories
GROUTS
MasterFlow 810 is a ready to use, non-shrink, natural aggregate cementitious grout for use in general civil engineering works. MasterFlow 810 provides extended working life and high early and ultimate strengths.
MasterFlow 810 is recommended for:
• Stanchion baseplates and columns
• Prefabricated concrete panels and beams
• Bridge bearing plates
• Anchor bolts and bars
• Underpinning
• Patch repair works
Features and benefits:
High strength – Provides good early and ultimate strengths which ensure quick return to service and long term durability.
• Non shrink – Hardens free of bleeding,settlement and drying shrinkage when placed at flowable consistency
• Flowable consistency – Ensures complete filling of even intricate voids often without the need for pumping and strapping.
• Ample working time – Remains placeable up to 1 hour, even at high ambient temperatures
• Dense, impermeable grout – Provides a good watertight seal.
• Economical – Greater volumes of grout can be mixed and handled with less labour.
• Easy to use – requires no special mixing
• equipment, it can be mixed in a pail using a grout stirrer.
• No added chloride – Does not add to chloride load on structure.
• Provides complete non shrink performance – When tested in accordance with simulated Bedplate Technique.
• Versatile – Can be placed from flowable to trowelable consistency
- llation
- High mechanical strength
- Variable length
- Good fire resistance
- Long life cycle
- Freedom of design
- Easy maintenance
Estimating data:
- A 25 kg bag of MasterFlow 810 when mixed to a flowable or trowelable consistency will yield the following volumes:
- Flowable
- Add 4.5 litres water Yield: 13.5 litres grout is
- Trowelable
- Add 3.4 litres water Yield: 12.5 litres grout
Categories
WATERPROOFING
Benefits:
- Good impact resistance and toughness.
- Good abrasion resistance and scratch resistance
- Low cure shrinkage that translates to very good dimensional
- stability
- Low permeability that can be used for surface protection
- Good resistance to salt and water for outdoor and marine application
- Very fast cure (in seconds) with treated parts back in service
- within 24 hours or less
Advantages:
- Fast reaction time and rapid curing
- Low VOC
- Excellent mechanical properties
- Curing even at 0°C
- Curing process insensitive against moisture
- High chemical resistance
