Author: admin

AMC-HAMMER OIL is supplied in 3 grades, 150, 320 and 460 centipoises with or without Molylube additive Molybdenum disulfide – to improve the lubrication and wear characteristics of the hammer.

AUS-TROL can be used with AUS-GEL, CR- 650 and LIQUI- POL to give a complete core recovery fluid that is solids free. It can also be used to make up stiff foam in air drilling operations.

• Effective – Improved core recovery in most difficult drilling conditions
• Economical – Saves on freight costs, storage and mixing time
• Versatile – Works in fresh or salty water and reduces filtrate loss to improve hole stability through sensitive clays
• Environmentally Friendly – AUS-TROL® is non toxic and does not ferment. The product is colourless, odourless and tasteless in water.

AMC-HAMMER OIL is supplied in 3 grades, 150, 320 and 460 centipoises with or without Molylube additive Molybdenum disulfide – to improve the lubrication and wear characteristics of the hammer.

Holes Size – Consumption (based on max. 35Opsi air) 3½“ to 5` – 1.5 to 2.0 litres/hour 5” to 7½“ -2.0 to 2.5 litres/hour 7 ½ “ to 8 ½ “ – 2.5 to 3.0 litres/hour 8 ½ “ to 8 ¾ “ – 3.0 to 3.5 litres/hour 8 ¾ “ to 17 ½ “ – 4.5 to 5.0 litres/hour

• With the addition of Molylube concentrate, friction and wear to the piston and cylinder is greatly reduced.
• Prevents metal to metal contact and surface scuffing – lubricates when oil films are unable to survive.
• The AMC-HAMMER OIL with Molylube additive is highly effective in salty water conditions when drilling with foam.
• The Oil/Molylube concentrate will not wash off the piston when foam is pumped through the hammer.
• AMC-HAMMER OIL with Molylube additive is premixed at AMC’s factory and has been formulated to remain in suspension.